- DescriptionThe AT32 receiving card is a small control board made for LED display systems that need to work all the time and have clear images. It can handle a maximum load of 512×384 at 60Hz, which makes it good for screens of medium size. Advanced capabilities for adjusting color and brightness on a per-pixel basis assist get rid of irregularities, making the picture on the screen smoother and more even.It has tools for repairing obvious seams between modules, so you can instantly fix uneven bright or dark lines without having to change the video feed. Support for RGB gamma tuning allows you change each color channel separately, which helps balance low grayscale performance and make white more accurate. When used with compatible transmitting hardware, the machine can also generate 3D displays. It can also rotate in 90-degree steps to allow for various installation arrangements.The structure has thick connectors that make it less sensitive to dust and vibrations, which makes it last longer in real-world situations. There are built-in monitoring tools that can track temperature and voltage, find communication errors, and report runtime. Redundant dual-card and loop protection are two backup systems that keep the display running even when something goes wrong. This makes the AT32 a reliable choice for demanding LED systems.Input Connections32 groups of parallel RGB signal support and 64 sets of serial data handling (which can be expanded to 128 sets).Two Gigabit Ethernet data portsTest the key input interface.Interfaces for OutputRGB data outputs through a hub connectionSupport for LVDS transmission (depends on the firmware)Video Input OptionsMaximum load: 512×384@60HzWorks with 3D video output (needs a transmitter that supports it)Supports angles of rotation: 0°, 90°, 180°, and 270°Main FeaturesAdjusting brightness at the pixel levelBalancing chroma at the pixel levelQuick fix for seam line problemsControl of red gamma on its ownControl of green gamma without helpControl of blue gamma on its ownAbility to integrate smart modulesUpload of automatic calibration from module memoryFunction for applying calibration with one clickMapping display for finding ports and cardsSetting up the startup image presetMonitoring of Ethernet error packetsSupport for dual power detectionRedundancy in firmware backupsFunction for reading back configurationSpecifications for electricityVoltage input: 3.8V to 5.5VRated current is 0.6A.3.0W of power usedThe environment in which it worksTemperature range for work: –20°C to 70°CNo condensation, humidity range: 10%–90% RHPlace to StoreTemperature for storage: –25°C to 125°CNo condensation in the humidity range of 0% to 95% RHSpecifications for the bodyThe size is 7.0 cm × 4.5 cm × 0.9 cm.Weight: 0.0165 kgInformation about packingEach unit comes in its own blister case, and each carton has 80 receiving boards.The box is 37.8 cm × 19.0 cm × 12.0 cm.
